Develop a Table Framework for Granite

You might have an extra slab of granite, after finishing a do-it-yourself job, like a kitchen renovation. Rather than wasting this precious material, turn it into a functional furniture piece. Create a wooden table frame and utilize the grey granite tiles. This job could be finished in a couple of hours and will offer you additional table space.
Directions as follows:

Subtract four inches from the length and width measurements to discover the dimensions for your table frame.
Second, cut two pieces of 2 by 4-inch hardwood to the span measurement you just discovered using a circular saw. Use these boards to build the support structure for your own table frame.
Thirdly, arrange the four pieces of 2-by-4-inch hardwood in a rectangular contour. Sandwich the two shorter planks between the ends of the two longer boards. Drive 4-inch wood screws to the depth of the shorter ones through the longer boards to fasten the framework.
These posts will be the legs for your own table.
Fifthly, lay the rectangular hardwood frame you just built level on the floor and stand among the 4-by-4-inch hardwood posts vertical inside each corner.